* speci?ations subject to change without notice. dimensions are in mm?.25 unless stated otherwise. idea, inc., 1351 titan way, brea, ca 92821 ph:714-525-3302, 800-led-idea; fax: 714-525-3304 catalog 995a t-1, (3-mm) round, quad pcb mount led indicator, J245B series J245B is designed to extend the reach of the led indicators into the front bezel area where the pcb edge remains a distance awa y and can be cmos driven to save components. the four lamps are positioned on a 0.3" pitch. the foot print of the pin-out is the s ame as the j244b but the lamps are centered 0.25" above the mounting plane and the lamps are signi?antly more forward. specify part desired as follows: J245B/order code led1 + order code led 2 + order code led 3 + order code led 4 for example: ?245b/i+y+2g designates an assembly with a red led, a yellow led and 2 green led's from left to right. order code and information (all ratings at 25? ambient) led lamp typical characteristics recom. op. if (ma) epoxy & type color order code peak vf (v) iv (mcd) 2 1/2 (nm) @if=20ma @if=2 ma (deg) tinted diffused red i 639 1.8 4.0 50 2 - 10 green g 575 1.7 2.5 60 2 - 10 yellow y 591 1.85 4.0 45 2 - 10 (typ for bi-color) green anode red or yellow anode + (pinout for single color) 19.1(.75) 20.3(.80) 3.5(.13 ) 2.5(.10) 7.62(.30) 15.24(.60 ) anode typ 8.6(.34) 27.6(1.09) 1.0(0.04) 2 pls 6.4(.25)
|